Implementation of investment and development projects from CLT for the commercial and private segment

[ Project ]
CrossLam
Sales of objects from CLT for investors and developers focused on fast product launch, managed cost and high liquidity of the finished object
Practice shows that CLT is not just a modern construction technology, but an effective investment tool that allows you to reduce the project implementation time, start monetization of the facility faster and increase the predictability of the construction cycle

CLT objects are perceived by the market as a modern, technological and high-quality product

Since 2021, we have been engaged in the construction and implementation of projects from CLT - house kits
[ Segments ]






  • Country development

  • Hotel and tourist infrastructure

  • Commercial objects

  • Individual housing construction of premium level

  • Country real estate business and premium class

  • Boutique hotels and glamping - high-level format

  • Sales offices and showroom

  • Pilot projects with further customization

  • Restaurant and public spaces

  • Investment projects where visual identity and architectural value are important


[ Architectural and constructive possibilities ]
Cross-glued CLT wood removes the usual restrictions. That's what the material gives the industry today
1
Speed
Construction times are reduced by 3 times. Finishing readiness. High level of training for finishing and installation of engineering systems
2
Environmental friendliness
100% coniferous wood is used. The material has a negative carbon footprint. There is no shrinkage, the material does not lead and does not warp, which simplifies operation
3
Freedom
The freedom of design of CLT is combined with any materials and allows you to implement any architectural styles. Any interior and exterior finishing technologies are available
4
Strength
Due to the cross-location of the CLT layers, it practically does not shrink and retains the geometry comparable to reinforced concrete. This allows you to build not only residential, but also public buildings
Open textured CLT surfaces allow you to abandon expensive finishing

Biophile design has become a trend in architecture
CLT is not a replacement for traditional materials, but a new tool that expands the boundaries of what is possible in development and architecture
[ Technology ]
Cross-Laminated Timber
Cross-glued wood, which changes the idea of load-bearing structures
Aesthetics
Harmony
Ecology
Practicality
Naturalness
Architectural Bureau



Adaptation - solutions to your needs and turnkey project development with a guarantee of excellent results

Design - development "from scratch" on the basis of in-depth adaptation to your request. The final result systematically exceeds standard expectations due to the individual architecture of solutions

Customization - the design of projects developed using other technologies for CLT

Value Cross Laminated Timber

CLT turns construction from the chaos of wet processes and long-term construction into a predictable, fast and investment-liquid product
  • Complex architectural forms, large spans, different geometric planes

    CLT allows you to implement curved facades, consoles and spans without intermediate supports up to 15-20 m. The architect receives the "freedom of the tree" with the bearing capacity of reinforced concrete.
    Polygonal bay windows, curved staircases, inclined walls - all this is milled on CNC
    1
  • High level of accuracy of installation work

    Tolerances according to GOST 33122-2014 - for the element. This means that the angles are 90°, the diagonals converge. There is no need to level the walls with plaster
    2
  • Knowingly accurate information about the quality of the home kit

    Each panel undergoes ultrasound control of adhesive seams and sorting of boards by strength. The customer receives a 3D model and test reports before shipment. Surprises "what's inside" are excluded
    3
  • Environmental friendliness of the material

    CLT is a renewable resource, binds CO2 (1 m³ of wood stores ~1 ton of CO2). FSC, EPD certificates. For green construction (LEED, BREEAM, GOST R 54964) gives up to 10-12 additional rating points
    4
  • Project pilotage - redistribution to another site without loss of quality

    Dismantling, transportation and reassembly are possible in 2-3 cycles without reducing the bearing capacity.
    This reduces the risk of "freezing" the project on a bad site
    5
  • Project customization: increase/decrease in area without loss of quality

    Entire panel sections are added or removed in multiples of the modular grid
    No need to recalculate the foundation and roof radically - CLT allows you to build up the walls "in place" as a designer
    6
  • Growth of domokomplekt investment

    CLT house on the secondary market is sold 10-15% more expensive than frame and 5-7% more wooden due to energy efficiency, no shrinkage and premium perception.
    The "domokomplekt CLT" lot is liquid faster than analogues
    7
  • Absence of shrinkage

    CLT humidity is 12±2% at the exit of the factory. You can immediately after assembly, cut into the windows, hang the facade, install engineering systems and start the turnkey finish.
    Time saving 6-12 months against log/bar
    8
  • Absence of wet work

    CLT does not require plastering, wet masonry. It can be built in winter at -30°C (European analogues work up to -25°C). No need for warm-ups, antifreezes and downtime.
    Cost reduction on the construction site
    9
  • Reduction of installation work time

    A house of 150-200 m² is assembled by a team of 3-4 people in 2-4 days. Compared to aerated concrete, brick or frame - acceleration is 3-5 times.
    10
  • Ability to combine projects

    CLT easily docks with steel beams (for ultra-long spans), with reinforced concrete (in seismic areas, up to 8-9 points) and with SIP panels (for cold attics). You can make a hybrid building: CLT-bearing skeleton + light facade or CLT-core of stiffness + extensions using frame technology
    11
CLT technology opens up new horizons for construction. It allows you to create reliable and durable structures, embodying the most daring architectural ideas

With the help of CLT, it is possible to achieve high accuracy during construction, which guarantees the quality and safety of objects. And becomes an indispensable tool for the implementation of innovative projects in construction

Thanks to CLT, you can be sure of the quality and stability of your project regardless of the season

[ Design ]



Textures
From coverage to author's expressiveness
Natural textures in the exterior as art

Now the rough texture becomes the semantic center. This is due to the trend of authenticity, slow design and biophilia

Here the texture interacts with natural lighting, season and weather - it's kinetic (changing) art
Natural textures in the interior
Dominant texture wall: Not wallpaper, but a "living" slice of travertine with natural pores filled with resin

Wavy cedar wall (rustic style) - each board has unique curls of fibers. Or a panel made of recycled paper and cotton with an uneven, rough surface similar to ancient papyrus

Contact us




crosslam@yandex.ru


+7 (980) 173-65-25


crosslam.online





Based in Moscow

2021-2026



OK
Made on
Tilda